manufacturer category series package voltage class rev . date ecliptek corp. oscillator ec25 ceramic 5.0v os29 11/10 ec25 series ? crystal clock oscillators ? cmos/ttl output ? +5.0v supply voltage ? tri-state output function ? high and low output drive options ? 4 pad ceramic smd package ? rohs compliant (pb-free) oscillator ec25 electrical specifications frequency range operating temperature range storage temperature range supply voltage (v dd ) input current (no load) frequency tolerance / stability output voltage logic high (v oh ) output current (i oh ) output voltage logic low (v ol ) output current (i ol ) rise / fall time duty cycle load drive capability tri-state input voltage start up time rms phase jitter 1.544mhz to 106.250mhz -10c to +70c or -40c to +85c -55c to +125c 5.0v dc 10% 10ma maximum 30ma maximum 50ma maximum 60ma maximum 100ppm, 50ppm, 25ppm or 20ppm maximum 2.4v dc minimum v dd -0.5v dc minimum -4ma <35.000mhz, -16ma >35.000mhz -16ma <70.000mhz 0.4v dc maximum 0.5v dc maximum +4ma <35.000mhz, +16ma >35.000mhz +16ma <70.000mhz 50 10(%) (standard) 50 10(%) (standard) 50 5(%) (optional) 50 5(%) (optional) -10c to +70c only 10lsttl load or 30pf cmos load 10lsttl load or 15pf cmos load 10ttl load or 50pf cmos load enables output enables output disables output: high impedance 10mseconds maximum 1pseconds maximum 1.544mhz to 32.000mhz 32.001mhz to 50.000mhz 50.001mhz to 70.000mhz 70.001mhz to 106.250mhz inclusive of all conditions: calibration tolerance at 25c, frequency stability over the operating temperature range, supply voltage change, output load change, first year aging at 25c, shock, and vibration w/ttl load w/cmos load load drive option "blank" load drive option "y" w/ttl load w/cmos load load drive option "blank" load drive option "y" <70.000mhz >70.000mhz <70.000mhz (option ?y?) no connection v ih : 2.0v dc v il : 0.8v dc 12khz to 20mhz offset frequency 10% to 90% of waveform w/30pf cmos load; 0.4v dc to 2.4v dc w/10lsttl load 10nsec max. <70.000mhz 10% to 90% of waveform w/15pf cmos load; 0.4v dc to 2.4v dc w/10lsttl load 5nsec max. >70.000mhz 10% to 90% of waveform w/50pf cmos load; 0.4v dc to 2.4v dc w/10ttl load 5nsec max. <70.000mhz at 50% of waveform w/cmos load or 1.4v dc w/ttl load <70.000mhz at 50% of waveform w/ttl load or w/cmos load >70.000mhz at 50% of waveform w/ttl load or w/cmos load <80.000mhz at 50% of waveform w/cmos load (80.001mhz to 100.000mhz) 800-ecliptek www.ecliptek.com for latest revision specifications subject to change without notice. h 1.6 l 7.0 w 5.0
manufacturer category series package voltage class rev . date ecliptek corp. oscillator ec25 ceramic 5.0v os29 11/10 ec25 00 et t ts y - 40.000m tr frequency tolerance / stability 00 = 100ppm maximum 45 = 50ppm maximum 25 = 25ppm maximum 20 = 20ppm maximum operating temperature range blank = -10c to +70c et = -40c to +85c duty cycle blank = 50 10(%) t = 50 5(%) packaging options blank = bulk tr = tape & reel frequency load drive capability blank = 10lsttl/30pf hcmos load maximum (<70mhz) blank = 10lsttl/15pf hcmos load maximum (>70mhz) y = 10ttl or 50pf hcmos load maximum (<70mhz) output control function ts = tri-state part numbering guide a b c d e f 16+.3-.1 7.5.1 6.75.1 4 .1 2.1 f g h j k l 8.1 b0* 1.5 +.1-0 a0* .3 .05 k0* tape m n o p q 1.5 min 50 min 20.2 min 13.2 40 min r s t u v qty/reel 2.5 min 10 min 22.4 max 360 max 16.4+2-0 1,000 reel *compliant to eia 481a mechanical dimensions all dimensions in millimeters tape and reel dimensions all dimensions in millimeters marking specifications environmental/mechanical specifications suggested solder pad layout all dimensions in millimeters line 1: ecliptek line 2: xx.xxx m frequency in mhz (5 digits maximum + decimal) line 3: xx y zz week of year last digit of year ecliptek manufacturing identifier tolerances = 0.1 pin 1: tri-state pin 2: case ground pin 3: output pin 4: supply voltage 800-ecliptek www.ecliptek.com for latest revision specifications subject to change without notice. 1.6 +0.2/-0.5 5.00 0.15 7.00 0.15 marking orientation 3.68 0.15 1.4 01 1.2 0.2 2.60 0.15 5.08 0.15 1 2 3 4 characteristic specification esd susceptibility mil-std-883, method 3015, class 1, hbm: 1500v fine leak test mil-std-883, method 1014, condition a flammability ul94-v0 gross leak test mil-std-883, method 1014, condition c mechanical shock mil-std-883, method 2002, condition b moisture resistance mil-std-883, method 1004 moisture sensitivity j-std-020, msl 1 resistance to soldering heat mil-std-202, method 210, condition k resistance to solvents mil-std-202, method 215 solderability mil-std-883, method 2003 temperature cycling mil-std-883, method 1010, condition b vibration mil-std-883, method 2007, condition a
|
